TO5 InGaAs Photodiode Manufacturers

Optical coherence tomography is a low-loss, high-resolution, non-invasive medical imaging technology developed in the early 1990s. It combines optical technology with ultrasensitive detectors. Using modern computer image processing, OCT fills the gap in resolution and imaging depth between microscopes and ultrasound imaging. The imaging resolution of OCT is about 10~15 μm, which is clearer than that of intravascular ultrasound (IVUS), but OCT cannot image through blood. Compared with IVUS, its tissue penetration ability is lower, and the imaging depth is limited to 1-2mm.

Thermistors are mainly used for temperature monitoring, overheating protection, etc. It is a temperature-sensitive semiconductor resistor whose resistance changes significantly with changes in temperature. It uses the heat-sensitive effect of semiconductor materials to measure and control temperature, and is widely used in various electronic devices and systems. Thermistors have the advantages of small size, fast response speed, and high measurement accuracy. Therefore, they have been widely used in temperature measurement, temperature control, overcurrent protection and other fields. Text symbols are generally represented by "RT".

In the industrial laser application, people usually use 915nm pumping in the past, but with the rapid development of fiber lasers, the market demand for higher power has become more and more prominent, and competition is becoming increasingly fierce. The 915nm wavelength has lower absorption efficient which brought double obstacles in cost and technical, limiting the development of high-power and low-cost fiber coupled laser modules.

In today's era of rapid development of laser technology, solid-state lasers and fiber lasers, as the two major mainstream laser products, have each demonstrated their unique charm and advantages in many fields such as industrial production, scientific research, and military applications.

Lidar (Laser Radar) is a radar system that emits a laser beam to detect the position and speed of a target. Its working principle is to send a detection signal (laser beam) to the target, and then compare the received signal (target echo) reflected from the target with the transmitted signal, and after proper processing, you can obtain relevant information about the target, such as Target distance, azimuth, altitude, speed, attitude, even shape and other parameters, so as to detect, track and identify aircraft, missiles and other targets. It consists of a laser transmitter, an optical receiver, a turntable, and an information processing system. The laser converts electrical pulses into light pulses and emits them. The optical receiver then restores the light pulses reflected from the target to electrical pulses and sends them to the display.

In various optical fiber interference instruments, in order to obtain the maximum coherence efficiency, the polarization state of the optical fiber propagating light is required to be very stable. The transmission of light in a single-mode fiber is actually two orthogonal polarization fundamental modes. When the optical fiber is an ideal optical fiber, the transmitted fundamental mode is two orthogonal double degenerate states, and the actual optical fiber is drawn due to There will be unavoidable defects, which will destroy the double degenerate state and cause the polarization state of the transmitted light to change, and this effect will become more and more obvious as the length of the fiber grows. At this time, the best way is to use Polarization maintaining fiber.