840nm SLD diode Manufacturers

Semiconductor lasers are a type of lasers that mature earlier and are developing rapidly. Because of its wide wavelength range, simple manufacture, low cost, easy mass production, and because of its small size, light weight, and long life, its variety develops quickly and its application The range is wide, and there are currently more than 300 species.

The fiber optic sensor network has three basic components, one of which is called a single-point sensor. An optical fiber only plays the role of transmission here, and the other is called a multi-point sensor, where one optical fiber connects many sensors together so that many sensors can share the light source to realize network monitoring. Then there is the smart fiber optic sensor. The multi-point optical fiber sensor is a grating from the outside, and periodic intervals are found through ultraviolet irradiation. When an optical fiber is incident, if the wavelength of the optical fiber is exactly twice the interval, the light wave will be strongly reflected, and if the optical fiber is subjected to temperature changes or strains, the reflected wavelength will change. This kind of sensor There can be many on one fiber, and it can be used for a variety of sensing applications by connecting them.

Laser sensors are sensors that use laser technology to measure. It consists of a laser, a laser detector and a measuring circuit. Laser sensor is a new type of measuring instrument. Its advantages are that it can realize non-contact long-distance measurement, fast speed, high precision, large range, strong anti-light and electrical interference ability, etc.

Photodiodes are often used as photodetectors. Such devices contain a p-n junction and usually have an intrinsic layer between the n and p layers. Devices with intrinsic layers are called PIN-type photodiodes. The depletion layer or the intrinsic layer absorbs light and generates electron-hole pairs, which contribute to the photocurrent. Over a wide power range, the photocurrent is strictly proportional to the absorbed light intensity.

Laser distance measuring is measured using a laser as a light source.It is divided into continuous laser and pulse laser according to the mode of laser operation.Gas lasers like helium-neon, argon ion, krypton cadmium and so on work in a continuous output state for phase laser ranging, dual heterogeneous GaAs semiconductor laser for infrared ranging; solid laser such as ruby, neodymium glass, for pulse laser ranging.Laser rangefinder due to the characteristics of good monochromy and strong orientation of laser, coupled with the semiconductor integration of electronic lines, compared with the photoelectric rangefinder, it can not only work day and night, but also improve the rangefinder accuracy.