Oxygen gas sensing laser diode Manufacturers

The C-band Micro Package EDFA Booster Fiber Amplifier Module provide a small size 50×50×15mm Micro Package, it can be used to improve the optical signal power in the range of - 6dbm to + 3dbm, and the saturation output power can be up to 20dbm, which can be used after the optical transmitter to improve the transmission power.

The 976nm 350Watt High Power Fiber Coupled Laser Diode is an industrial standard laser diode in many welding applications, brazing, cladding, repair welding, hardening and other surface treatments. Also a commercial product for fiber laser pumping.

The 1578nm 10mW DFB Laser Diode For Hydrogen Sulfide Detection can be used for Hydrogen Sulfide(HS) gas detective application. This MQW DFB laser features 10 mW of output optical power, high Side Mode Suppression Ratio (SMSR). It features in a built-in thermoelectric cooler, thermistor, and a rear-facet monitor photodiode for external optical power control.

The 808nm 8W 200um Multimode Fiber Diode Laser offer up to 8 watts of CW output power from a 200 µm fiber. They are Fabry-Perot single emitter devices. The model referenced in this product listing has a numerical aperture of 0.22. The fiber is un-terminated for direct coupling to your sample or fiber cladding layer. The 915nm 10W series multimode pump modules offer high brightness, a small footprint and simplified thermal management by distributing the laser diodes and dissipating the heat source.

The 976nm 380Watt Fiber Coupled Diode Laser is an industrial standard laser diode in many welding applications, brazing, cladding, repair welding, hardening and other surface treatments. Also a commercial product for fiber laser pumping.

976nm 200mW Laser Module Single Mode Pump Laser diodes are designed for applications such as low noise EDFA's, dense wavelength division multiplexing (DWDM) EDFA's and CATV pumping applications. They deliver up to 600mW of kink free output power from single mode fiber. These devices These lasers are designed as pump sources for erbium doped fiber amplifier (EDFA) applications. These devices utilize a fiber Bragg grating design for enhanced wavelength and power stability performance. These products have been designed to ensure superior wavelength locking over drive current temperature and optical feedback changes. They are field proven diode lasers and come with integrated TEC cooler and thermistor.