MMF Raman WDM Manufacturers

Narrow linewidth lasers are widely used as light sources and receivers in fiber optic communication systems. In terms of light sources, narrow linewidth lasers can provide high-quality and highly stable optical signals, which can reduce signal distortion and bit error rates. In terms of receivers, narrow linewidth lasers can provide high sensitivity and high-precision light detection, which can enhance the signal detection capabilities of the receiver. In addition, narrow linewidth lasers can be used for functions such as optical filtering and frequency conversion.

An optical fiber sensor is a sensor that converts the state of the measured object into a measurable light signal. The working principle of the optical fiber sensor is to send the incident light beam from the light source into the modulator through the optical fiber. The interaction between the modulator and the external measured parameters determines the optical properties of the light, such as the intensity, wavelength, frequency, phase, polarization state, etc. It changes and becomes a modulated optical signal, which is then sent to the optoelectronic device through the optical fiber and passed through the demodulator to obtain the measured parameters. During the whole process, the light beam is introduced through the optical fiber, passes through the modulator, and then emitted. The role of the optical fiber is first to transmit the light beam, and secondly to act as an optical modulator.

Fiber Optical Amplifier is a kind of optical amplifier using optical fiber as gain medium. Typically, the gain medium is fiber doped with rare earth ions, such as erbium (EDFA, Erbium-Doped Fiber Amplifier), neodymium, ytterbium (YDFA), praseodymium and thulium. These active dopants are pumped (provided with energy) by light from a laser, such as a fiber-coupled diode laser; in most cases, the pump light and the amplified signal light travel simultaneously in the fiber core.

Optical fiber splice, which connects two optical fibers permanently or detachably, and has a splice part for protecting the components. The optical fiber splice is the end device of the optical fiber. The optical fiber connector is a physical interface used to connect an optical fiber cable. FC is the abbreviation of Ferrule Connector. The external reinforcement method is a metal sleeve and the fastening method is a turnbuckle. The ST connector is usually used for 10Base-F, and the SC connector is usually used for 100Base-FX.