+86-0755 21009302  
  ricky01@boxoptronics.com
Products
Home > Products > 1480nm single wavelength laser

1480nm single wavelength laser Manufacturers

We know that we only thrive if we can guarantee our combined rate competiveness and good quality advantageous at the same time for 1480nm single wavelength laser, Many years of work experience, we have realized the importance of providing good quality products and the best before-sales and after-sales services.
1480nm single wavelength laser, We strongly believe that technology and service is our base today and quality will create our reliable walls of future. Only we've better and better quality , could we achieve our customers and ourselves, too. Welcome customers all over the word to contact us for getting further business and reliable relationships. We have been always here working for your demands whenever you want.

Related Products

Hot Products

  • 1550nm SLD broadband light source

    1550nm SLD broadband light source

    The 1550nm SLD broadband light source adopts semiconductor super radiant diode technology to output a broadband spectrum and at the same time has a higher output power. The working wavelength can be selected from 840nm 1310nm 1550nm and other wavelength, which is suitable for applications such as optical fiber sensing. We can provide communication interface and host computer software to facilitate the monitoring of the state of the light source.
  • 915nm 50W Diode Laser For Printing Or Pumping

    915nm 50W Diode Laser For Printing Or Pumping

    The 915nm 50W Diode Laser For Printing Or Pumping is designed and manufactured by BoxOptronics, It has high-performance and high-reliability requirements for fiber and solid-state laser pumping.
  • Manual Variable Fiber Optical Attenuator

    Manual Variable Fiber Optical Attenuator

    The Manual Variable Fiber Optical Attenuator allow the user to manually vary the attenuation of the signal in the fiber as it is transmitted through the device. These VOAs can be used to to precisely balance the signal strengths in fiber circuits or to balance an optical signal when evaluating the dynamic range of the measurement system. The Manual Variable Optical Attenuator have single mode or PM fiber pigtails with a 900um jacket. The VOAs are offered unterminated or terminated with FC/PC or FC/APC connectors. For other connector styles or custom requests, please contact Technical Support.
  • 200um InGaAs Avalanche Photodiode Chip

    200um InGaAs Avalanche Photodiode Chip

    200um InGaAs Avalanche Photodiode Chip is specially designed to have a low dark, low capacitance and high avalanche gain. Using this chip an optical receiver with a high sensitivity can be achieved.
  • 1570~1603nm L-band EDFA Amplifier

    1570~1603nm L-band EDFA Amplifier

    The following is about 1570~1603nm L-band EDFA Amplifier related, I hope to help you better understand 1570~1603nm L-band EDFA Amplifier. Welcome new and old customers to continue to cooperate with us to create a better future together!
  • 940nm 12W LD COS Laser Chip on Submount

    940nm 12W LD COS Laser Chip on Submount

    The 940nm 12W LD COS Laser Chip on Submount, output power 12W, high efficiency, long lifetime, widely used in Industrial pump, R&D, Laser illumination, medical and other fields.
  • Related Blog
  • Reviews

  • Applications of Broadband Light Source

    The three principal applications of broadband light sources are as follows. Let’s take a quick look at each one to get a better understanding of them.

  • What is an eye diagram

    The eye diagram is a series of digital signals accumulated and displayed on the oscilloscope. It contains a wealth of information. From the eye diagram, the influence of intersymbol crosstalk and noise can be observed, which reflects the overall characteristics of the digital signal, so as to estimate the system optimization. Therefore, eye diagram analysis is the core of signal integrity analysis for high-speed interconnect systems.

  • Long-distance ultra-stable laser breaks new record

    An international consortium led by the UK's National Physical Laboratory has set a new record for comparing ultra-stable lasers at long distances by metering a fibre network. A related research paper was published in the journal Nature Communications.

  • ​Working principle of laser pumping

    Energy is absorbed in the medium, creating excited states in the atoms. Population inversion is achieved when the number of particles in an excited state exceeds the number of particles in the ground state or less excited states. In this case, a mechanism of stimulated emission can occur and the medium can be used as a laser or optical amplifier.

  • Laser distance measuring

    Laser distance measuring is measured using a laser as a light source.It is divided into continuous laser and pulse laser according to the mode of laser operation.Gas lasers like helium-neon, argon ion, krypton cadmium and so on work in a continuous output state for phase laser ranging, dual heterogeneous GaAs semiconductor laser for infrared ranging; solid laser such as ruby, neodymium glass, for pulse laser ranging.Laser rangefinder due to the characteristics of good monochromy and strong orientation of laser, coupled with the semiconductor integration of electronic lines, compared with the photoelectric rangefinder, it can not only work day and night, but also improve the rangefinder accuracy.

  • Laser linewidth measurement

    Although both spectrum and frequency spectrum are electromagnetic spectrum, due to the difference in frequency, the analysis methods and test instruments of spectrum and frequency spectrum are very different. Some problems are difficult to solve in the optical domain, but it is easier to solve them through frequency conversion to the electrical domain.

Send Inquiry

Copyright @ 2020 Shenzhen Box Optronics Technology Co., Ltd. - China Fiber Optic Modules, Fiber Coupled Lasers Manufacturers, Laser Components Suppliers All Rights Reserved.