1030nm laser diode Manufacturers

Optical fiber modules are components used to connect optical fiber cables to electronic devices. Optical fiber modules have many different parts, and different modules are designed to different specifications. Each part of the module is connected to a board that can be installed as a unit of electronic equipment.

Fiber lasers refer to lasers that use rare-earth-doped glass fibers as gain media. Fiber lasers can be developed on the basis of fiber amplifiers: high power density is easily formed in the fiber under the action of pump light, resulting in laser working material. The energy level "number inversion" can form laser oscillation output when a positive feedback loop (form a resonant cavity) is properly added.

Recently, Zhang Weijun, a researcher at Anhui Institute of Optics and Fine Mechanics, Hefei Institute of Physical Science, Chinese Academy of Sciences, has made progress in atmospheric nitrogen dioxide (NO2) detection technology. A new method for rapid and sensitive detection of NO2" was published in the American Chemical Society "Analytical Chemistry".

The traditional laser uses the thermal accumulation of laser energy to melt and even volatilize the material in the active area. In the process, a large number of chips, micro-cracks and other processing defects will be generated, and the longer the laser lasts, the greater the damage to the material. The ultra-short pulse laser has an ultra-short interaction time with the material, and the single-pulse energy is super strong enough to ionize any material, realize non-hot-melt cold processing, and obtain the ultra-fine, low-damage processing advantages incomparable with long-pulse laser. At the same time, for the selection of materials, ultrafast lasers have wider applicability, which can be applied to metals, TBC coatings, composite materials, etc.

Thermistors are mainly used for temperature monitoring, overheating protection, etc. It is a temperature-sensitive semiconductor resistor whose resistance changes significantly with changes in temperature. It uses the heat-sensitive effect of semiconductor materials to measure and control temperature, and is widely used in various electronic devices and systems. Thermistors have the advantages of small size, fast response speed, and high measurement accuracy. Therefore, they have been widely used in temperature measurement, temperature control, overcurrent protection and other fields. Text symbols are generally represented by "RT".

The fiber optic sensor network has three basic components, one of which is called a single-point sensor. An optical fiber only plays the role of transmission here, and the other is called a multi-point sensor, where one optical fiber connects many sensors together so that many sensors can share the light source to realize network monitoring. Then there is the smart fiber optic sensor. The multi-point optical fiber sensor is a grating from the outside, and periodic intervals are found through ultraviolet irradiation. When an optical fiber is incident, if the wavelength of the optical fiber is exactly twice the interval, the light wave will be strongly reflected, and if the optical fiber is subjected to temperature changes or strains, the reflected wavelength will change. This kind of sensor There can be many on one fiber, and it can be used for a variety of sensing applications by connecting them.