TO46 PIN Photodiode Manufacturers

Master Oscillator Power-Amplifier. Compared with traditional solid and gas lasers, fiber lasers have the following advantages: high conversion efficiency (light-to-light conversion efficiency over 60%), low laser threshold; simple structure, working material is flexible medium, easy to use; high beam quality ( It is easy to approach the diffraction limit); the laser output has many spectral lines and a wide tuning range (455 ~ 3500nm); small size, light weight, good heat dissipation effect and long service life.

In recent years, with the continuous expansion of pulsed laser applications, the high output power and high single pulse energy of pulsed lasers is no longer a purely pursued goal. In contrast, the more important parameters are: pulse width, pulse shape and repetition frequency. Among them, the pulse width is particularly important. Almost just by looking at this parameter, you can judge how powerful the laser is. The pulse shape (especially the rise time) directly affects whether the specific application can achieve the desired effect. The repetition frequency of the pulse usually determines the operating rate and efficiency of the system.

Erbium-doped fiber amplifier (EDFA, that is, an optical signal amplifier with erbium ion Er3 + doped in the core of the signal passing through) is the first optical amplifier developed by the University of Southampton in the UK in 1985. It is the greatest optical amplifier in optical fiber communication. One of the inventions. Erbium-doped fiber is an optical fiber doped with a small amount of rare earth element erbium (Er) ions in a quartz fiber, and it is the core of an erbium-doped fiber amplifier. Since the late 1980s, the research work of erbium-doped fiber amplifiers has continuously made major breakthroughs. WDM technology has greatly increased the capacity of optical fiber communications. Become the most widely used optical amplifier device in current optical fiber communication.

In data centers, optical modules exist everywhere, but few people mention them. In fact, optical modules are already the most widely used products in data centers. Today's data centers are basically optical fiber interconnection, and the situation of cable interconnection has become less and less. Therefore, without optical modules, data centers cannot operate at all. The optical module converts electrical signals into optical signals at the sending end through photoelectric conversion, and then transmits through optical fibers, and then converts the optical signals into electrical signals at the receiving end. That is to say, any optical module has two parts: transmitting and receiving. The function is to do photoelectric conversion and electro-optical conversion, so that the optical modules are inseparable from the equipment at both ends of the network. There are thousands of devices in a medium-sized data center.

Fiber Optical Amplifier is a kind of optical amplifier using optical fiber as gain medium. Typically, the gain medium is fiber doped with rare earth ions, such as erbium (EDFA, Erbium-Doped Fiber Amplifier), neodymium, ytterbium (YDFA), praseodymium and thulium. These active dopants are pumped (provided with energy) by light from a laser, such as a fiber-coupled diode laser; in most cases, the pump light and the amplified signal light travel simultaneously in the fiber core.

Erbium-doped mode-locked fiber laser is a laser that uses erbium-doped optical fiber as an active medium. Erbium-doped elements can absorb light energy within a specific wavelength range and emit laser photons of a specific wavelength. Mode-locked fiber laser is a laser that can produce extremely short pulses and is often used in scientific research, communication technology, and material processing.