+86-0755 21009302  
  ricky01@boxoptronics.com
Products
Home > Products > 915nm 50W Diode Laser For Printing

915nm 50W Diode Laser For Printing Manufacturers

We are proud of the superior customer gratification and wide acceptance due to our persistent pursuit of top of the range both of those on merchandise and service for 915nm 50W Diode Laser For Printing,915nm 50W Diode Laser For Pumping, We're very proud of your fantastic popularity from our prospects for our products' reputable quality.
915nm 50W Diode Laser For Printing, We take measure at any expense to achieve essentially the most up-to-date equipment and approaches. The packing of nominated brand is our a further distinguishing feature. The products to assure years of trouble-free service has attracted a great deal customers. The solutions are obtainable in improved designs and richer assortment, they're created scientifically of purely raw supplies. It readily available in a variety of designs and specs for your selection. The most recent kinds are a great deal better than the preceding one particular and they are quite popular with lots of prospects.

Related Products

Hot Products

  • 850nm 5mW Fiber Coupled Superluminescent Diode SLDs

    850nm 5mW Fiber Coupled Superluminescent Diode SLDs

    The 850nm 5mW Fiber Coupled Superluminescent Diode SLDs is a light source for fiber transmission systems, fiber optic gyros, fiber optic sensors,optical coherence tomography, optical measurements. The diode is packaged in 14-pin standard butterfly package with monitor photodiode and thermo-electric cooler (TEC). Module is pigtailed with single mode polarization maintaining fiber and connectorized by FC/APC connector.
  • Erbium-ytterbium Co-doped Triple-clad Single-mode Fiber

    Erbium-ytterbium Co-doped Triple-clad Single-mode Fiber

    BoxOptronics Erbium-ytterbium Co-doped Triple-clad Single-mode Fiber is mainly used in laser radar, laser ranging, communication amplification and other fields. The optical fiber uses low-refractive index fluorine-doped silica as the second cladding material, which not only has low splicing loss and high light-to-light conversion efficiency, but also has good high temperature resistance. The optical fiber can adjust the absorption coefficient and gain spectrum with good consistency.
  • 1290nm 5mW TO-CAN DFB Laser Diode

    1290nm 5mW TO-CAN DFB Laser Diode

    This 1290nm 5mW TO-CAN DFB Laser Diode is a product operable over a broad temperature range with a low temperature-wavelength coefficient. It is well suited for applications such as communications research, interferometry, and optical reflectometry for distance measurement in fiber or free space. Each device undergoes testing and burn-in. This laser comes packaged in a 5.6 mm TO Can. It contains an integrated aspheric focusing lens in the cap, allowing the focus spot and numerical aperture (NA) to be matched to SMF-28e+ fiber.
  • 1290nm DFB Coaxial Laser Diode TEC Up to 7mW

    1290nm DFB Coaxial Laser Diode TEC Up to 7mW

    1290nm DFB Coaxial Laser Diode TEC Up to 7mW is the DFB laser diode coupled to an optical fiber and packaged into a hermetic case. The output power is available from 1MW, 1270nm~1610nm CWDM wavelength available.
  • L-band Erbium-doped Fiber

    L-band Erbium-doped Fiber

    The L-band erbium-doped fiber is doped and optimized for L-band single-channel and multi-channel fiber amplifiers, ASE light sources, metropolitan area networks, CATV, and EDFA for DWDM. High doping can reduce the length of the erbium fiber, thereby reducing the nonlinear effect of the fiber. The fiber can be pumped at 980 nm or 1480 nm, and has low loss and good consistency with communication fiber connections.
  • 915nm 30W 2-PIN Multimode Laser Diode

    915nm 30W 2-PIN Multimode Laser Diode

    The 915nm 30W 2-PIN Multimode Laser Diode is designed and manufactured by BoxOptronics, It has high-performance and high-reliability requirements for fiber and solid-state laser pumping.
  • Related Blog
  • Reviews

  • Fiber amplifier

    Optical fiber amplifier is a new all-optical amplifier used in optical fiber communication line to realize signal amplification. According to its position and function in the optical fiber line, it is generally divided into relay amplification, pre amplification and power amplification.

  • Broadband light sources and its function

    This paper mainly introduces broadband light sources and its function.

  • What is erbium-doped fiber amplifier

    Erbium-doped fiber amplifier (EDFA, that is, an optical signal amplifier with erbium ion Er3 + doped in the core of the signal passing through) is the first optical amplifier developed by the University of Southampton in the UK in 1985. It is the greatest optical amplifier in optical fiber communication. One of the inventions. Erbium-doped fiber is an optical fiber doped with a small amount of rare earth element erbium (Er) ions in a quartz fiber, and it is the core of an erbium-doped fiber amplifier. Since the late 1980s, the research work of erbium-doped fiber amplifiers has continuously made major breakthroughs. WDM technology has greatly increased the capacity of optical fiber communications. Become the most widely used optical amplifier device in current optical fiber communication.

  • Analysis of Four Factors Affecting the Cutting Quality of Laser Cutting Machine

    Compared with traditional oxyacetylene, plasma and other cutting processes, laser cutting has the advantages of fast cutting speed, narrow slit, small heat affected zone, good verticality of slit edge, smooth cutting edge, and many kinds of materials that can be cut by laser. Laser cutting technology has been widely used in the fields of automobiles, machinery, electricity, hardware and electrical appliances.

  • Pump laser：Types & Applications

    Pump lasers are the "energy supply core" of laser systems. They inject light energy of a specific wavelength into gain media (such as erbium-doped fibers, solid-state crystals) to excite the media to produce stimulated radiation, and finally form a stable laser output. Their performance directly determines the power, efficiency and stability of laser systems.

  • Laser distance measuring

    Laser distance measuring is measured using a laser as a light source.It is divided into continuous laser and pulse laser according to the mode of laser operation.Gas lasers like helium-neon, argon ion, krypton cadmium and so on work in a continuous output state for phase laser ranging, dual heterogeneous GaAs semiconductor laser for infrared ranging; solid laser such as ruby, neodymium glass, for pulse laser ranging.Laser rangefinder due to the characteristics of good monochromy and strong orientation of laser, coupled with the semiconductor integration of electronic lines, compared with the photoelectric rangefinder, it can not only work day and night, but also improve the rangefinder accuracy.

Send Inquiry

Copyright @ 2020 Shenzhen Box Optronics Technology Co., Ltd. - China Fiber Optic Modules, Fiber Coupled Lasers Manufacturers, Laser Components Suppliers All Rights Reserved.