Superluminescent Diode SLDs Manufacturers

Since Maman first obtained laser pulse output in 1960, the process of human compression of laser pulse width can be roughly divided into three stages: Q-switching technology stage, mode-locking technology stage, and chirped pulse amplification technology stage. Chirped pulse amplification (CPA) is a new technology developed to overcome the self-focusing effect generated by solid-state laser materials during femtosecond laser amplification. It first provides ultra-short pulses generated by mode-locked lasers. "Positive chirp", expand the pulse width to picoseconds or even nanoseconds for amplification, and then use the chirp compensation (negative chirp) method to compress the pulse width after obtaining sufficient energy amplification. The development of femtosecond lasers is of great significance.

The traditional laser uses the thermal accumulation of laser energy to melt and even volatilize the material in the active area. In the process, a large number of chips, micro-cracks and other processing defects will be generated, and the longer the laser lasts, the greater the damage to the material. The ultra-short pulse laser has an ultra-short interaction time with the material, and the single-pulse energy is super strong enough to ionize any material, realize non-hot-melt cold processing, and obtain the ultra-fine, low-damage processing advantages incomparable with long-pulse laser. At the same time, for the selection of materials, ultrafast lasers have wider applicability, which can be applied to metals, TBC coatings, composite materials, etc.

Optical fiber transmits signals through light guide, non-conductive, and not afraid of lightning strikes, so there is no need to use grounding protection. According to the transmission mode of light in the optical fiber, we divide it into multi-mode optical fiber and single-mode optical fiber.

Thermistors are mainly used for temperature monitoring, overheating protection, etc. It is a temperature-sensitive semiconductor resistor whose resistance changes significantly with changes in temperature. It uses the heat-sensitive effect of semiconductor materials to measure and control temperature, and is widely used in various electronic devices and systems. Thermistors have the advantages of small size, fast response speed, and high measurement accuracy. Therefore, they have been widely used in temperature measurement, temperature control, overcurrent protection and other fields. Text symbols are generally represented by "RT".

Since the advent of the first solid-state pulsed ruby laser, the development of lasers has been very rapid, and lasers with various working materials and operating modes have continued to appear. Lasers are classified in various ways: