+86-0755 21009302  
  ricky01@boxoptronics.com
Products
Home > Products > (2+1)X1 pump combiner

(2+1)X1 pump combiner Manufacturers

With our outstanding management, robust technical capability and strict top quality regulate system, we carry on to supply our shoppers with reputable top quality, reasonable charges and excellent companies. We purpose at becoming amongst your most reliable partners and earning your fulfillment for (2+1)X1 pump combiner,pump combiner,high power pump combiner, Seeing believes! We sincerely welcome the new prospects abroad to set up company interactions and also expect to consolidate the interactions with all the long-established clients.
(2+1)X1 pump combiner, We warmly welcome your patronage and will serve our clients both at home and abroad with items of superior quality and excellent service geared to the trend of further development as always. We believe you will benefit from our professionalism soon.

Related Products

Hot Products

  • 2mm Active Area TO-CAN InGaAs PIN Photodiode

    2mm Active Area TO-CAN InGaAs PIN Photodiode

    2mm Active Area TO-CAN InGaAs PIN Photodiode,high sensitivity photo-diode for use in infrared instrumentation and sensing applications. High spectral response in the region 800 nm to 1700 nm.
  • 1310nm 1550nm DFB CWDM laser source module

    1310nm 1550nm DFB CWDM laser source module

    The 1310nm 1550nm DFB CWDM laser source module uses DFB semiconductor lasers, single-mode fiber output, adjustable power, professionally designed high-precision, high-stability current drive control board to ensure laser safety and stability, low noise operation, low cost, high cost performance, small size Compact and easy to integrate, it is widely used in scientific research, communication, medical treatment, spectral analysis, bioengineering and other fields.
  • 3Ghz High Speed InGaAs Photo Detector Module

    3Ghz High Speed InGaAs Photo Detector Module

    3Ghz High speed InGaAs Photo detector Module is with photoelectric response bandwidth ≥3GHz, a pulse rise time of 125ps and wavelength range of 1020~1650nm. SMA interface is used for RF signal output, which connect with RF test equipment. for optical transmission system, ultrafast laser pulse detection.
  • 1550nm 8dBm SM SOA Semiconductor Optical Amplifier

    1550nm 8dBm SM SOA Semiconductor Optical Amplifier

    The 1550nm 8dBm SM SOA Semiconductor Optical Amplifier is a semiconductor optical amplifier with high Signal Gain, designed to be used in general applications to increase optical launch power to compensate for loss of other optical devices. The 1550nm 8dBm SM SOA Semiconductor Optical Amplifier can be ordered with Single Mode (SM) or Polarization Maintaining (PM) fiber input/output. This module version is an ideal building block for system integrators, especially in optical communication networks and CATV applications.
  • 1550nm 40mW 200Khz Narrow Linewidth DFB Butterfly Laser Diode

    1550nm 40mW 200Khz Narrow Linewidth DFB Butterfly Laser Diode

    The 1550nm 40mW 200Khz Narrow Linewidth DFB Butterfly Laser Diode is based on a unique single DFB chip, adopts a unique chip design, advanced packaging technology, has low linewidth and relative intensity noise, and has low sensitivity to wavelength and working current. The device adopts standard 14 pin butterfly package, with high output power, high stability, high reliability.
  • 850nm 10mW SLD broadband light source

    850nm 10mW SLD broadband light source

    The 850nm 10mW SLD broadband light source adopts semiconductor super radiant diode technology to output a broadband spectrum and at the same time has a higher output power. The working wavelength can be selected from 840nm 1310nm 1550nm and other wavelength, which is suitable for applications such as optical fiber sensing. We can provide communication interface and host computer software to facilitate the monitoring of the state of the light source.
  • Related Blog
  • Reviews

  • Classification of optical fiber temperature sensor

  • Long-distance ultra-stable laser breaks new record

    An international consortium led by the UK's National Physical Laboratory has set a new record for comparing ultra-stable lasers at long distances by metering a fibre network. A related research paper was published in the journal Nature Communications.

  • Hefei Research Institute has made progress in atmospheric nitrogen dioxide detection technology

    Recently, Zhang Weijun, a researcher at Anhui Institute of Optics and Fine Mechanics, Hefei Institute of Physical Science, Chinese Academy of Sciences, has made progress in atmospheric nitrogen dioxide (NO2) detection technology. A new method for rapid and sensitive detection of NO2" was published in the American Chemical Society "Analytical Chemistry".

  • The key technology of high power laser diode

    Structural design optimization: The three basic principles of semiconductor lasers are: electrical injection and confinement, electrical-optical conversion, optical confinement and output, which correspond to electrical injection design, quantum well design, and optical field design of the waveguide structure, respectively. Optimizing the structure of quantum wells, quantum wires, quantum dots, and photonic crystals has promoted the continuous improvement of laser technology, making the output power and electro-optical conversion efficiency of lasers higher and higher, beam quality getting better and better, and higher reliability .

  • Analysis of the application of fiber laser in different industries

  • The composition structure of the optical fiber sensor network

    The fiber optic sensor network has three basic components, one of which is called a single-point sensor. An optical fiber only plays the role of transmission here, and the other is called a multi-point sensor, where one optical fiber connects many sensors together so that many sensors can share the light source to realize network monitoring. Then there is the smart fiber optic sensor. The multi-point optical fiber sensor is a grating from the outside, and periodic intervals are found through ultraviolet irradiation. When an optical fiber is incident, if the wavelength of the optical fiber is exactly twice the interval, the light wave will be strongly reflected, and if the optical fiber is subjected to temperature changes or strains, the reflected wavelength will change. This kind of sensor There can be many on one fiber, and it can be used for a variety of sensing applications by connecting them.

Send Inquiry

Copyright @ 2020 Shenzhen Box Optronics Technology Co., Ltd. - China Fiber Optic Modules, Fiber Coupled Lasers Manufacturers, Laser Components Suppliers All Rights Reserved.