The High Power C-band 1W 30dBm Erbium Doped Fiber Amplifier EYDFA (EYDFA-HP) is based on the double-clad erbium-doped fiber amplifier technology, using a unique optical packaging process, coupled with a reliable high-power laser protection design, to achieve high-power laser output in the 1540~1565nm wavelength range. With high power and low noise, it can be used in fiber optic communication, Lidar, etc.
The 1mm InGaAs/InP PIN Photodiode Chip offer superb response from 900nm to 1700nm, 1mm InGaAs/InP PIN Photodiode Chip is ideal for high bandwidth 1310nm and 1550nm optical networking applications. The device series offers high responsivity, low dark current and high bandwidth for high performance and low sensitivity receiver design. This device is ideal for manufacturers of optical receivers, transponders, optical transmission modules and combination PIN photo diode – transimpedance amplifier.
BoxOptronics Panda Polarization Maintaining PM Erbium Doped Fiber is mainly used in 1.5μm polarization-maintaining optical amplifiers, lidar, and eye-safe laser products. Polarization maintaining erbium doped fiber has high birefringence and excellent polarization maintaining characteristics. The fiber has a higher doping concentration, which reduces the required pump power and fiber length, thereby reducing the impact of nonlinear effects. At the same time, the optical fiber shows low splicing loss and strong bending resistance. Based on the optical fiber preparation process of BoxOptronics Laser, the polarization-maintaining erbium-doped optical fiber has good consistency.
The High Power C-band 2W 33dBm Erbium-Doped Fiber Amplifiers EDFA(EYDFA-HP) is based on the double-clad erbium-doped fiber amplifier technology, using a unique optical packaging process, coupled with a reliable high-power laser protection design, to achieve high-power laser output in the 1540~1565nm wavelength range. With high power and low noise, it can be used in fiber optic communication, Lidar, etc.
50um InGaAs Avalanche Photodiode Chip is photodiode with internal gain produced by the application of a reverse voltage. They have a higher signal-to-noise ratio (SNR) than photodiodes, as well as fast time response, low dark current, and high sensitivity. Spectral response range is typically within 900 - 1650nm.
This 1550nm 5W Single Wavelength DFB Erbium-doped Fiber Laser Module adopts DFB laser chip and high-power gain optical path module to realize the high-power output of single-mode fiber. The professionally designed laser driving and temperature control circuit ensures the safe and stable operation of the laser.
Copyright @ 2020 Shenzhen Box Optronics Technology Co., Ltd. - China Fiber Optic Modules, Fiber Coupled Lasers Manufacturers, Laser Components Suppliers All Rights Reserved.
