Professional Knowledge

Main classification of sensors

2021-03-16
The main classification of sensors:
By purpose
Pressure sensitive and force sensitive sensors, position sensors, level sensors, energy sensors, speed sensors, accelerometers, radiation sensors, thermal sensors.
By principle
Vibration sensor, humidity sensor, magnetic sensor, gas sensor, vacuum sensor, biosensor, etc.
Press output signal
Analog sensor: converts the measured non-electrical quantity into an analog electrical signal.
Digital Sensor: Converts the measured non-electrical quantities into digital output signals (both direct and indirect).
Digital sensor: Converts the measured semaphore into the output of a frequency signal or short-cycle signal (including direct or indirect conversion).
Switch Sensor: When a measured signal reaches a certain threshold, the sensor outputs a set low or high signal accordingly.
By manufacturing process
Integrated sensors are fabricated using standard process technology for the production of silicon-based semiconductor integrated circuits.
Part of the circuitry used to initially process the signal under test is also typically integrated on the same chip.
The thin film sensor is formed by a film of a corresponding sensitive material deposited on a dielectric substrate (substrate). When a mixing process is used, part of the circuit can also be fabricated on this substrate.
The thick film sensor is made by coating a slurry of a corresponding material on a ceramic substrate, which is usually made of Al2O3, and then heat-treated to form a thick film.
Ceramic sensors are produced using standard ceramic processes or some variation thereof (sol, gel, etc.).
After the appropriate preparatory operation is completed, the formed component is sintered at a high temperature. There are many common characteristics between the two processes of thick film and ceramic sensors. In some respects, the thick film process can be considered as a variant of the ceramic process.
Each process technology has its own advantages and disadvantages. Ceramic and thick film sensors are more reasonable due to 
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept