+86-0755 21009302  
  ricky01@boxoptronics.com
Products
Home > Products > High Power 3W EDFA Amplifier Module

High Power 3W EDFA Amplifier Module Manufacturers

We have now probably the most innovative production equipment, experienced and qualified engineers and workers, regarded high quality control systems and also a friendly expert income team pre/after-sales support for High Power 3W EDFA Amplifier Module, For even more inquires make sure you will not wait to make contact with us. Thank you - Your help continuously inspires us.
High Power 3W EDFA Amplifier Module, We provide good quality but unbeatable low price and the best service. Welcome to post your samples and color ring to us .We are going to produce the items according to your request. If you are interested in any items we offer, please feel free to contact us directly by mail, fax, telephone or internet. We've been here to answer your questions from Monday to Saturday and looking forward to cooperating with you.

Related Products

Hot Products

  • Panda Polarization Maintaining PM Erbium Doped Fiber

    Panda Polarization Maintaining PM Erbium Doped Fiber

    BoxOptronics Panda Polarization Maintaining PM Erbium Doped Fiber is mainly used in 1.5μm polarization-maintaining optical amplifiers, lidar, and eye-safe laser products. Polarization maintaining erbium doped fiber has high birefringence and excellent polarization maintaining characteristics. The fiber has a higher doping concentration, which reduces the required pump power and fiber length, thereby reducing the impact of nonlinear effects. At the same time, the optical fiber shows low splicing loss and strong bending resistance. Based on the optical fiber preparation process of BoxOptronics Laser, the polarization-maintaining erbium-doped optical fiber has good consistency.
  • 1064nm 9W Multimode Fiber Pigtailed 2 PIN Laser Diode Modules

    1064nm 9W Multimode Fiber Pigtailed 2 PIN Laser Diode Modules

    The 1064nm 9W Multimode fiber pigtailed 2 PIN laser diode modules have a high efficiency, stability and superior beam quality. The modules are achieved by transforming the asymmetric radiation from the laser diode chip into an output fiber with small core diameter by using special micro optics. Inpection and burn-in procedures guarantee reliability, stability and long lifetime of each modules.
  • 1030nm ASE Broadband Light Source

    1030nm ASE Broadband Light Source

    The 1030nm ASE broadband light source is based on ytterbium-doped fiber and semiconductor pump laser. The spectrum covers 1030nm wavelength, with high output power and polarization extinction ratio as low as 0.2dB. It can be used for fiber device testing, FBG grating production, etc.
  • 1568~1611nm L+band ASE Broadband Light Source, Up to 200mW

    1568~1611nm L+band ASE Broadband Light Source, Up to 200mW

    It completely covers the L+ band 1568~1611nm wavelength range, the spectral range exceeds 40nm, and the spectral flatness is better than 2.5dB. The single-mode fiber output power is greater than 200mW, which is suitable for applications like fiber-optic communication, fiber-optic sensing.
  • 1310nm 100mW DFB Butterfly Package Fiber Coupled Laser Diode

    1310nm 100mW DFB Butterfly Package Fiber Coupled Laser Diode

    The 1310nm 100mW DFB Butterfly Package Fiber Coupled Laser Diode is based on multiquantum well (MQW) distributed-feedback (DFB) and a highly reliable ridge waveguide structure. This device is housed in a high performance, 14-pin butterfly package and coupled to 1m of FC/APC-connectorized polarization-maintaining fiber.
  • 793nm 10W MM Fiber Pigtail Laser Diode

    793nm 10W MM Fiber Pigtail Laser Diode

    The 793nm 10W MM fiber Pigtail laser diode introduces a new high brightness single-emitter based, fiber-coupled diode laser pump module that delivers 10W output power into a 105um fiber core at a wavelength of 793nm, with a numerical aperture of 0.22NA.
  • Related Blog
  • Reviews

  • Raman Fiber Amplifiers Enhance Performance of Long-Haul Optical Communication Systems

    In the field of optical communications, long-distance transmission has long been challenged by issues such as signal attenuation and distortion. Raman fiber amplifiers, with their unique advantages, have become a key technology for improving the performance of long-distance optical communication systems.

  • High Density Fiber Management is Faced with Two Difficulties of Protection and Maintenance

  • Working principle of ASE broadband light source

    ASE broadband light generated by erbium-doped fiber is amplified spontaneous emission light generated by short-wavelength laser pumping erbium-doped fiber. As shown in the following diagram, the pumped rare earth ions transition between upper and lower energy levels to generate spontaneous emission light, which is amplified in the stimulated emission process. This process is repeated continuously, and even a fairly high output power can be achieved under sufficient pumping conditions. (ASE=Amplified Spontaneous Emission, amplified spontaneous emission light)

  • The semiconductor laser market has broad prospects and a wide range of industry applications

    Semiconductor laser is a kind of laser developed in the 1960s, using semiconductor materials as working materials. Since the end of the 1970s, semiconductor lasers have clearly developed in two directions. One type is information-type lasers for the purpose of transmitting information, and the other type is power-type lasers for the purpose of directly using the optical power of the output laser.

  • Solution for poor quality cutting of fiber laser cutting machine

  • What is erbium-doped fiber amplifier

    Erbium-doped fiber amplifier (EDFA, that is, an optical signal amplifier with erbium ion Er3 + doped in the core of the signal passing through) is the first optical amplifier developed by the University of Southampton in the UK in 1985. It is the greatest optical amplifier in optical fiber communication. One of the inventions. Erbium-doped fiber is an optical fiber doped with a small amount of rare earth element erbium (Er) ions in a quartz fiber, and it is the core of an erbium-doped fiber amplifier. Since the late 1980s, the research work of erbium-doped fiber amplifiers has continuously made major breakthroughs. WDM technology has greatly increased the capacity of optical fiber communications. Become the most widely used optical amplifier device in current optical fiber communication.

Send Inquiry

Copyright @ 2020 Shenzhen Box Optronics Technology Co., Ltd. - China Fiber Optic Modules, Fiber Coupled Lasers Manufacturers, Laser Components Suppliers All Rights Reserved.