+86-0755 21009302  
  ricky01@boxoptronics.com
Products
Home > Products > 1310nm/1550nm InGaAs Photodiode

1310nm/1550nm InGaAs Photodiode Manufacturers

Our company insists all along the quality policy of "product good quality is base of enterprise survival; buyer fulfillment will be the staring point and ending of an company; persistent improvement is eternal pursuit of staff" and also the consistent purpose of "reputation very first, shopper first" for 1310nm/1550nm InGaAs Photodiode,InGaAs photodiode,InGaAs Photodiode Pigtail, We glance ahead to receiving your enquires quickly and hope to have the chance to operate together with you inside the future. Welcome to just take a seem at our organization.
1310nm/1550nm InGaAs Photodiode, Our organization. Situated inside the national civilized cities, the visitors is very easy, unique geographical and economic situations. We pursue a "people-oriented, meticulous manufacturing, brainstorm, construct brilliant" organization. hilosophy. Strict top quality management, fantastic service, reasonable cost in Myanmar is our stand on the premise of competition. If vital, welcome to make contact with us by our web page or telephone consultation, we're planning to be happy to serve you.

Related Products

Hot Products

  • 1270nm DFB Coaxial Pigtail Laser Diode

    1270nm DFB Coaxial Pigtail Laser Diode

    The 1270nm DFB Coaxial Pigtail Laser Diode series of MultiQuantum Well (MQW) Distributed Feedback (DFB) lasers have been designed specifically to satisfy the requirements of SONET CWDM transmission. The devices feature high output power and wide operating temperature range. Their uncooled, hermetically sealed, coaxial fiber pigtailed packages are a cost-effective means of providing a high-speed light source for intermediate-reach and long-reach applications.
  • 1270nm To 1610nm CWDM 20mW SM Or PM Fiber Coupled Laser

    1270nm To 1610nm CWDM 20mW SM Or PM Fiber Coupled Laser

    The 1270nm To 1610nm CWDM 20mW SM Or PM Fiber Coupled Laser cover customer selection of large wavelengths from 1260nm to 1650nm which are fabricated in a hermetically sealed 14-pin butterfly package.We also have full customer selection of output powers, package types and output fibers of SM fibers, PM fibers and other special fibers.
  • Programmable Optical Attenuator For Optical Fiber Communication

    Programmable Optical Attenuator For Optical Fiber Communication

    The Programmable Optical Attenuator For Optical Fiber Communication is used for attenuation control of optical power in optical fiber path, with power monitoring, large attenuation range, high adjustment accuracy and stable power, which can provide benchtop type or modular packaging.
  • 1310nm SLD broadband light source

    1310nm SLD broadband light source

    The 1310nm SLD broadband light source adopts semiconductor super radiant diode technology to output a broadband spectrum and at the same time has a higher output power. The working wavelength can be selected from 840nm 1310nm 1550nm and other wavelength, which is suitable for applications such as optical fiber sensing. We can provide communication interface and host computer software to facilitate the monitoring of the state of the light source.
  • 840nm 850nm 20mW Superluminescent Diode (SLD) Light Sources

    840nm 850nm 20mW Superluminescent Diode (SLD) Light Sources

    The 840nm 850nm 20mW Superluminescent Diode (SLD) Light Sources adopts semiconductor super radiant diode technology to output a broadband spectrum and at the same time has a higher output power. The working wavelength can be selected from 840nm 1310nm 1550nm and other wavelength, which is suitable for applications such as optical fiber sensing. We can provide communication interface and host computer software to facilitate the monitoring of the state of the light source.
  • 1064nm 9W Multimode Fiber Pigtailed 2 PIN Laser Diode Modules

    1064nm 9W Multimode Fiber Pigtailed 2 PIN Laser Diode Modules

    The 1064nm 9W Multimode fiber pigtailed 2 PIN laser diode modules have a high efficiency, stability and superior beam quality. The modules are achieved by transforming the asymmetric radiation from the laser diode chip into an output fiber with small core diameter by using special micro optics. Inpection and burn-in procedures guarantee reliability, stability and long lifetime of each modules.
  • Related Blog
  • Reviews

  • The composition structure of the optical fiber sensor network

    The fiber optic sensor network has three basic components, one of which is called a single-point sensor. An optical fiber only plays the role of transmission here, and the other is called a multi-point sensor, where one optical fiber connects many sensors together so that many sensors can share the light source to realize network monitoring. Then there is the smart fiber optic sensor. The multi-point optical fiber sensor is a grating from the outside, and periodic intervals are found through ultraviolet irradiation. When an optical fiber is incident, if the wavelength of the optical fiber is exactly twice the interval, the light wave will be strongly reflected, and if the optical fiber is subjected to temperature changes or strains, the reflected wavelength will change. This kind of sensor There can be many on one fiber, and it can be used for a variety of sensing applications by connecting them.

  • Near-infrared to mid-infrared tunable lasers

    Generally speaking, when people talk about infrared light sources, they are referring to light with vacuum wavelengths greater than ~700–800 nm (the upper limit of the visible wavelength range).

  • The difference between FP laser and DFB laser

  • Fiber cut-off wavelength

    The fiber cut-off wavelength is to ensure that only one mode exists in the fiber. One of the main transmission characteristics of single-mode fiber is the cut-off wavelength, which is of great significance for fiber optic cable manufacturers and users of fiber optic cables to design and use fiber optic transmission systems.

  • laser distance measurng

    laser distance measurng uses a laser as a light source for ranging. According to the way the laser works, it is divided into continuous optical devices and pulse lasers. Ammonia, gas ions, atmosphere temperature and other gas detectors work in a continuous forward state, used for phase laser ranging, dual heterogeneous semiconductor lasers, used for infrared ranging, ruby, gold glass and solid-state lasers , used for pulsed laser ranging.

  • 980/1550nm Wavelength Division Multiplexer (WDM)

    The 980/1550nm wavelength division multiplexer (WDM) is a key component of erbium-doped fiber lasers and amplifiers. 980/1550nm WDM is mostly made of single-mode fiber (SMF) and made by winding fusion tapering method. With the development of optical fiber communication and sensing technology and the successful development of polarization-maintaining fibers, PMF circulators and isolators, more and more systems use PMF and polarization-maintaining devices to package the polarization characteristics of the optical transmission in the subsystem.

Send Inquiry

Copyright @ 2020 Shenzhen Box Optronics Technology Co., Ltd. - China Fiber Optic Modules, Fiber Coupled Lasers Manufacturers, Laser Components Suppliers All Rights Reserved.